+96878109286 info@aurexsmart.com
Whatsapp
0
BFT MITTO B RCB02 R1 two channel gate remote in Oman
BFT Remote Controls

BFT MITTO B RCB02 R1 Remote in Oman | 2 Channel, D111904

In stockSKU D111904

BFT MITTO B RCB02 R1 two-channel rolling-code handset, reference D111904, on 433.92 MHz with a 50 to 100 metre range. Runs on a single 12 V type 23A cell. If you have a working MITTO already, this one copies from it in under a minute without opening the control box — bring both to the counter and we will do it while you wait

Price
Original price was: 10 OMR.Current price is: 5 OMR.

Availability: 10 in stock

Open every day, 8:00 am to 10:00 pm

  • Authorized dealerOfficial brand distribution
  • Supply and installationOur own technicians across Oman
  • Manufacturer warrantyClaims handled locally in Oman

Overview

The BFT MITTO B RCB02 R1 is a two channel rolling code handset, reference D111904. Two buttons, 433.92 MHz, and a range of 50 to 100 metres. We stock the BFT MITTO B RCB02 R1 in Oman. We copy or pair it at our counter in Al Khuwair.

BFT MITTO B RCB02 R1 specifications


ReferenceD111904
Part number2600534
Channels2
Frequency433.92 MHz
CodingRolling code
Range50 to 100 m
Battery12 V, one type 23A cell
CloningEr Ready, copies from another MITTO
ProgrammingEELink, or at the receiver

Copying an existing handset

If you already have a working MITTO, you do not need to open the control box. Hold buttons 1 and 2 together on the old handset until its light comes on. Press the button you want to copy. Within ten seconds, hold buttons 1 and 2 together on the new handset. Then press its matching button. Wait ten seconds and try the gate.

Bring both handsets to us and we will do it while you wait.

Two buttons or four

ChannelsTwoFour
ReferenceD111904D111906
Typical useGate only, or gate plus one moreGate, garage, barrier, light

The BFT MITTO B RCB02 R1 in Oman and its four channel twin share a body and a battery. Buy the four channel version only if you have something else to control.

Programming the BFT MITTO B RCB02 R1 in Oman

If you have no working handset to copy, the code goes in at the receiver instead. Hold the learn button, press the handset button, and the receiver stores it. That has to happen within radio range of the gate.

Common questions

The copy procedure did not work. Why? Your control panel has to be enabled for remote programming, and not every installer switches it on. If it is off, we pair the handset at the receiver instead.

What is the second button for? A second gate, a garage door, or a partial opening if your board supports one. It does nothing until you pair it.

Is this the same as a MITTO 2? No. The old MITTO 2 is a different, discontinued model. This one is the B RCB series and it is current.

Where is the hidden button? There is not one on this model. Buttons 1 and 2 pressed together do that job, so there is no need to open the case.

For the current generation, see the MITTO COOL C2. Browse the range under BFT remote controls.

Technical data

Product Specifications

BFT MITTO B RCB02 R1 Specifications

  • Brand: BFT
  • Model: MITTO B RCB02 R1
  • Reference: D111904
  • Part number: 2600534
  • Type: handheld transmitter
  • Channels: 2
  • Frequency: 433.92 MHz
  • Coding: rolling code
  • Range: 50 to 100 m
  • Battery: 12 V, one type 23A (A23) cell
  • Dimensions: 60 × 40 × 15 mm
  • Weight: 22 g
  • Cloning: Er Ready — copies directly from another MITTO
  • Programming: at the receiver, or remote to remote; EELink via Unipro, Uniradio or Proxima
  • Works with: BFT control units with a built-in receiver; CLONIX 2, CLONIX 2E and CLONIX 4 RTE receivers
  • Four channel version: MITTO B RCB04 (D111906)
  • Superseded by: MITTO COOL C2 (D112306), which uses a CR2032 cell
  • Not the same as: MITTO 2 (D111750), an older discontinued handset
  • Country of origin: Italy
Scroll to Top