LIFE OP3 UNI Swing Gate Motor Kit in Oman | Made in Italy

180 OMR

Availability: 100 in stock

A complete Italian-made swing gate kit built around two LIFE OP3 UNI ram motors. LIFE rates the OP3 at 800 kg on a 2 m leaf, dropping to 400 kg at 3 m — read the length that matches your gate, not the headline figure. Supplied with control unit, photocells and remotes. Stocked in Muscat and installed across Oman by Aurex Smart Systems.

The LIFE OP3 UNI is a two-motor kit for swing gates, built in Italy by LIFE home integration. Leaf length decides this purchase. LIFE rates the OP3 at 800 kg on a 2 m leaf, and 400 kg at 3 m. We stock the LIFE OP3 UNI Oman kit in Muscat and fit it on villa and compound gates.

What the LIFE OP3 UNI Oman kit fits

Weight and length are not separate limits. Find the row that matches your leaf, then check the weight against it.

Leaf lengthMax leaf weight
2.0 m800 kg
2.5 m600 kg
3.0 m400 kg

Pillar depth matters just as much. The hinge should sit no more than 90 mm behind the pillar face for a 90° opening. At 120° that drops to 50 mm. Deeper pillars need a niche cut for the ram. Longer leaves take the LIFE OP5 UNI kit instead.

Specifications

Motor supply230 V AC, 50 Hz
DriveIrreversible linear screw
Thrust2,000 N
Time to open 90°19 seconds
Duty cycle35%
Travel stopsAdjustable stop plates
Protection ratingIP54

What’s in the box

  • Two OP3 UNI motors, brackets included
  • GE UNI RS DL control unit, receiver built in
  • One pair of VISIO photocells
  • Flashing light and two rolling-code remotes

Mains supply, conduit and civil work are quoted separately.

Extra LIFE remotes are stocked and pair to the receiver later.

Installation

Our engineers set the rear bracket on the pillar and the front bracket on the leaf. The motors then wire back to the control unit. Opening and closing stops are set inside each ram by hand.

We pair the remotes, run the learning cycle to time the two leaves, then set force and obstacle sensitivity. The gate is tested on the photocells before handover.

Common questions about the LIFE OP3 UNI Oman kit

How much space do I need behind the hinge?

Ninety millimetres at most for a 90° opening. Measure from the pillar face back to the hinge centre. Deeper pillars need a niche so the ram clears on closing.

Do I still need gate stops in the ground?

No. The UNI version has adjustable stop plates inside the ram. That is what separates it from the standard OP3, which uses limit switches.

Can someone push the gate open when it is closed?

No. The drive is irreversible, so the leaf locks once the motor stops. A separate electric lock is not usually needed at this size.

Should I take the OP3 or the OP5?

Measure your leaf first. Anything over 3 m needs the OP5, even if the weight looks fine. Both sit in our LIFE swing gate motors range.

LIFE OP3 UNI Specifications

  • Brand: LIFE
  • Model: OPTIMO OP3 UNI
  • Kit code: SETUP OP3 UNI DL 942M
  • Max leaf length: 3 m
  • Max leaf weight: 800 kg at 2 m / 600 kg at 2.5 m / 400 kg at 3 m
  • Drive type: Irreversible linear screw
  • Motor power supply: 230 V AC, 50 Hz
  • Thrust: 2,000 N
  • Net rod travel: 300 mm
  • Time to open 90°: 19 s
  • Duty cycle: 35%
  • Nominal work time: 10 min
  • Travel stops: Adjustable mechanical stop plates
  • Limit switches: None on the UNI version
  • Encoder: None on the UNI version
  • Capacitor: 8 µF, supplied
  • Thermal cut-out: 140 °C
  • Protection rating: IP54
  • Operating temperature: -20 °C to +70 °C
  • Max centre distance: 755 mm
  • Max hinge setback: 90 mm at 90°, 50 mm at 120°
  • Motor dimensions: 95 × 106 × 860 mm
  • Motor weight: 8.5 kg each
  • Control unit: GE UNI RS DL with integrated receiver
  • Radio frequency: 433.92 MHz LIFE Rolling Code
  • Made in: Italy
Brand

Life

Weight

17 kg (two motors)

Dimensions

95 × 106 × 860 mm per motor

Gate type

Swing

Max leaf length

3 m

Max leaf weight

800 kg at 2 m

Voltage

230 V AC

Motor type

Linear ram, irreversible

Country of origin

Italy

Reviews

There are no reviews yet.

Be the first to review “LIFE OP3 UNI Swing Gate Motor Kit in Oman | Made in Italy”

Your email address will not be published. Required fields are marked *

People Also Bought

Scroll to Top