CAME AXI AXI25DGS Swing Gate Motor in Oman

The CAME AXI25DGS is a 24 V irreversible gearmotor with encoder. It suits swing gate leaves up to 2.5 m long and 250 kg. The product code is 801MP-0040. CAME designs it for residential gates and describes it as suited to coastal and beach-area sites. We stock it in Muscat, and our engineers install it.

CAME AXI25DGS Specifications

This AXI25DGS listing is for the motor. CAME supplies the control board separately, and its AXI kits pair two motors with a ZL65 board. Ask us for a full quote so the board, photocells and remotes are priced with the motor.

Wiring is simple, with one three-conductor cable to each motor. A release lever, protected by a trilobe key, opens the gate by hand. On-board mechanical stops set the travel. With dedicated CAME accessories, it can also run during a power cut.

Leaves up to 2 m on narrow posts may suit the CAME FTX20DGC articulated arm motor instead. Browse all CAME swing gate motors for the full range.

Installation

Our engineers fix the motor bracket to the post and the gate leaf. They wire the cable to the control board and set the mechanical stops. They then pair your remotes and test every safety device.

Common Questions

What leaf size does the AXI25DGS suit?
Up to 2.5 m and 250 kg per leaf, based on CAME’s published range. Some retailers quote 300 kg. Send us your leaf length and weight, and we confirm before you order.

Does it include a control board?
No. The motor is supplied without one. Ask us to quote the board with your motor.

Can I open the gate by hand?
Yes. A release lever, protected by a trilobe key, unlocks the motor for manual opening.

Will it work in a power cut?
It can, with CAME’s dedicated battery accessories. Ask us to add them to your quote.